China Heze Hengxiang Wood co Ltd

hd(2)
hdm(5)
hs(1)

China Heze Hengxiang Wood co Ltd

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

paulownia s4s primed boards
Specification: 3-7/16, 4-1/2, 4-23/32, 5-7/16--width
Detail: Description: S3S OR S4S FJ Primed Board, Edge Glued and Laminated allowed, Exterior Type One Glue, NC Prime -Pattern: Tongue and Groove, Clapboard, Dolly Varden, Bevel, Shiplap, Channel Rustic, Rustic Vee, Board and Batten, R...

decoration mouldings for cabinets
Specification: 3-7/16, 4-1/2, 4-23/32, 5-7/16--width
Detail: Products Wood crown moulding wood Species Paulownia wood Finish "prime" 2 coat PU & 1 coat water based primer, sand between coats, Dimension tolerance: +0.3mm/-0.0mm Surface finishes PU primed /painted /unprimed Moistu...

paulownia moulding
Specification: 3-7/16, 4-1/2, 4-23/32, 5-7/16--width
Detail: Paulownia moulding product finish: "premium" 1 coat gesso & 2 coat water based primer, sand between coats, thin gesso coat and smooth. 1. Species: Paulownia 2. Model Number: 42/66mm*11/18mm, length up to 5400mm, various prof...

paulownia s4s primed boards
Specification: 17.5mm(11/16"), 19mm(3/4"), 25.4mm(1"), 32mm(1-1/4"), 38mm(1-1/2
Detail: Description: S3S OR S4S FJ Primed Board, Edge Glued and Laminated allowed, Exterior Type One Glue, NC Prime -Pattern: Tongue and Groove, Clapboard, Dolly Varden, Bevel, Shiplap, Channel Rustic, Rustic Vee, Board and Batten, R...

paulownia s4s
Specification: 17.5mm(11/16"), 19mm(3/4"), 25.4mm(1"), 32mm(1-1/4"), 38mm(1-1/
Detail: Description: S3S OR S4S FJ Primed Board, Edge Glued and Laminated allowed, Exterior Type One Glue, NC Prime -Pattern: Tongue and Groove, Clapboard, Dolly Varden, Bevel, Shiplap, Channel Rustic, Rustic Vee, Board and Batten, R...

casing moulding`
Specification: 3/4 x 2-1/4, 3/4 x 2-1/2, 3/4 x 3-1/4, 3/4 x 3-1/2, 3/4 x 4, 1 x
Detail: Casing Molding: Casing molding surrounds a door, or window opening, on the flat inside walls of a home. It covers both the edge of the drywall or plaster, and the edge of the jamb, giving the finished look to your opening. D...

base mouldings
Specification: 5/8 x 3, 5/8 x 3-1/2, 5/8 x 4, 5/8 x 4-1/2, 5/8 x 5, 5/8 x 5-1/2
Detail: -Base Moldings: Base molding installed along the bottom edge, where the base meets the floor. And, or, a cap (base cap) may be added to the top of the base, which used to cover up the gap that occurs between the wall bottoms a...

crown mouldings
Specification: 3/8,5/8 x 1-3/4, 2-1/4, 2-3/8, 2-5/8, 3-1/4, 3-5/8, 5-3/8.
Detail: -Crown Moldings: Crown molding attached to both wall and the ceiling. The molding itself is attached at a 45 degree angle to both of these surfaces. It softens the 90 degrees angle where the ceiling and wall meet. Crown moldin...

base mouldings
Specification: 3/8,5/8 x 1-3/4, 2-1/4, 2-3/8, 2-5/8, 3-1/4, 3-5/8, 5-3/8.
Detail: -Crown Moldings: Crown molding attached to both wall and the ceiling. The molding itself is attached at a 45 degree angle to both of these surfaces. It softens the 90 degrees angle where the ceiling and wall meet. Crown moldin...

paulownia wooden mouldings
Specification: 5/8 x 3, 5/8 x 3-1/2, 5/8 x 4, 5/8 x 4-1/2, 5/8 x 5, 5/8 x 5-1/2
Detail: -Base Moldings: Base molding installed along the bottom edge, where the base meets the floor. And, or, a cap (base cap) may be added to the top of the base, which used to cover up the gap that occurs between the wall bottoms a...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1